KDP-DALI 01
Presence detector for DALi lighting control
38
Instructions manual |
www.grupotemper.com
NOTE
Adjust knob to other
position from ” “
1sec after, goes back to ” “
FIG.10-A
FIG.10-B
W
FIG.10-C
W
LED and load off
W
Detector switches to AUTO mode
W
Adjust knob to ” “
from other position
300
5
100
2000
300
5
100
2000
300
5
100
2000
300
5
100
2000
300
5
100
2000
LED flashes slowly for 25sec &
Load is off
LED and load keep on 5sec
(the actual light level range is
10 - 2000Lux)
LED flashes quickly for 5sec &
Load is off (the actual light level
range is out of 10 - 2000Lux)
When the actual light level is out of the range 10 - 2000Lux, detector will
learn 25sec, then the red LED flashes quickly for 5sec. When the actual
light level is below 10Lux, Lux value is set to 10Lux, or is above 2000Lux,
Lux value is set to 2000Lux.
Installer should be away from the detector to avoid affecting the luminous
flux that reaches the detector when learning Lux value.
