KDP-DALI 01
Presence detector for DALi lighting control
31
Instructions manual |
Helpful tips for installation
•
•
•
•
•
•
•
FIG.4-A
FIG.
FIG. 4-C
4-B
W
W
Installation tips specially for DALI
dimming presence detector
>1m
<1m
Since the detector is in response
to temperature change, please
avoid the following conditions
(See FIG.4-A & FIG.4-B):
Avoid aiming the detector
toward the objects which may
be swayed in the wind, such as
curtain, tall plants, miniature
garden, etc.
Avoid aiming the detector
toward to the objects whose
surfaces are highly reflective,
such as mirror, monitor, etc.
Avoid mounting the detector
near heat sources, such as
heating vents, air conditioning,
vents as dryers, lights,
etc.ventilações como secadores,
luzes, etc.
The detector should be
placed in room where it can
measure both natural light
and artificial light
simultaneously.
Direct light on the detector
from any illumination should
be avoided.
You should be away from the
detector to avoid affecting
the luminous flux that
reaches the detector when
making Lux value
setting.
Do not install the detector
directly next to a window or
sun blind which can cause
incorrect measurement on
the natural light
(Refer to FIG.4-C).