kobalttools.com
6
SAFETY INFORMATION
• Heavy protective clothing may increase operator fatigue, which could lead to heat stroke. During
weather that is hot and humid, heavy work should be scheduled for early morning or late afternoon
hours when temperatures are cooler.
• Wear eye protection which is marked to comply with ANSI Z87.1 as well as hearing and head
protection when operating this equipment.
• Always be aware of what you are doing when using the chain saw. Use common sense. Do not
operate the chain saw when you are tired, ill, or under the influence of alcohol, drugs, or
medication.
• Do not expose the chain saw to rain.
• Do not use the chain saw in damp or wet locations.
• Stay alert and pay attention to what you are doing. Use common sense when using this unit.
• Keep all parts of your body away from the saw chain when the unit is running.
• Always carry the chain saw by the front handle with the battery removed and the guide bar and saw
chain positioned to the rear.
• Never let anyone use your chain saw who has not received adequate instructions in its proper use.
• Before you start the unit, make sure the saw chain is not contacting any object.
• Stop the chain saw before setting it down.
• To avoid accidental starting, never carry the unit with your finger on the trigger switch.
• Maintain the unit with care. Keep the cutting edge sharp and clean for best performance and to
reduce the risk of injury. Follow instructions for lubricating and changing accessories.
• Keep handles dry, clean, and free of oil and grease.
• Use only Kobalt 40 V batteries.
• Do not dispose of batteries in a fire, the cell may explode, check with local codes for possible
special disposal instruction.
• Do not open or mutilate the batteries; released electrolyte is corrosive and may cause damage to
the eyes or skin, and may be toxic if swallowed.
• Exercise care in handling battery in order not to short the battery with conducting material such as
rings, bracelets and keys. The battery or conductor may overheat and cause burns.
• Do not operate a chain saw with one hand. Use a firm grip with thumbs and fingers encircling the
chain saw handles. Serious injury to the operator, helpers, bystanders, or any combination of these
persons may result from one-handed operation. A chain saw is intended for two handed use.
• Avoid body contact with grounded surfaces such as metal pipes and wire fences. There is an
increased risk of electric shock if your body is grounded.
• Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely
assembled. The chain should slow to a stop when the trigger switch is released. If the chain
continues to turn after the trigger switch has been released, have the unit serviced by an authorized
service center.
• Check for damaged parts. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting, and any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service dealer unless
otherwise indicated elsewhere in this manual.
• All chain saw service, other than the items listed in the operation and maintenance sections, should
be performed by your authorized service center.
• Always maintain a proper stance.
• Do not use chain saw if switch does not turn it on and off. Have defective switch replaced by
authorized service center.
