Kobalt KCS 120-06 User Manual Download Page 10 | Manualshive

Page: 10 / 31

background image

kobalttools.com

10

UNPACKING

This product has been shipped completely assembled.

• Carefully remove the product and any accessories from the box. Make sure that all items listed in

the package contents section are included.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily operated

the product.

• If any parts are damaged or missing, please call 1-888-3KOBALT (1-888-356-2258) for assistance.

WARNING

• If any parts are damaged or missing, do not operate this product until the parts are replaced.

Failure to heed this warning could result in serious personal injury.

• Do not attempt to modify this product or create accessories not recommended for use with this

product. Any such alteration or modification is misuse and could result in a hazardous condition

leading to possible serious personal injury.

SAFETY INFORMATION

«
...
8
9
10
11
12
...
»

Summary of Contents for KCS 120-06
































Reviews:

No comments

Related manuals for KCS 120-06

Brand: CAMPAGNOLA Pages: 122

Brand: Omega Pages: 68

Power X Change PXCCSS-0182

Brand: Ozito Pages: 12

Brand: Narex Pages: 64

Brand: Parkside Pages: 256

Brand: bonomi Pages: 20

Brand: Dolmar Pages: 28

Brand: Dolmar Pages: 76

Brand: Jonsered Pages: 35

Brand: Jonsered Pages: 40

Brand: Jonsered Pages: 37

Brand: Jonsered Pages: 40

Brand: Jonsered Pages: 80

Brand: Maruyama Pages: 138

Spring Assist TB4016CC

Brand: Troy-Bilt Pages: 23

Brand: Sandri Garden Pages: 28

Brand: Poulan Pro Pages: 56

Brand: Zenoah Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands