13
Throttle trigger
MENU21：3ch monitor
3ch movement
Calibration
▶Displays current 3ch servo movement.
MENU23：Adjust volume
+ key
▶Recalibrate used volume settings
MENU22：Adjustment of 3ch position
+ key
− key
127 〜 (Each default positions) 〜 ＋127
▶Adjusting the movement amount of 3ch servo
in each position (position 01〜05)
■MENU 21〜23
Steering wheel
Foward key
Back key
※CPU of the transmitter recognizes physical end points of
steering/throttle and neutral position. It corrects volume
consumption caused by frequently use or malfunction caused by shocks.
The use of this function will depend on your frequency of use and
your operation method
This function can cause trouble when it is performed incorrectly.
We recommend sending this to our service department for repair,
when you are not familiar with this function.
1.
Hold + key for a while
2.
Use Forward/Back keys to choose positions
3.
Push +/- keys to set positions.
Push both keys together to reset.
4.
Push Forward key from (05 position) then
LCD displays "EXIT". Push + key to set.
Adjust using
1.
Hold + key for a while
2.
Fully turn steering wheel to right/left
then release.
3.
Fully pull/press throttle trigger in
forward/reverse position then release.
4.
LCD displays OK . Then, press + key
to set.
Adjust using
Caution!
5 positions (-100 / -50 / 0 / +50 / +100 ) are factory preset.
