3
2 1
Name of parts
Unit preparation
※Alarm sounds when batteries are depleted. Install fresh
batteries as soon as possible to keep radio power.
Model name (MENU26)
Voltage
Antenna
LCD display (factory setting)
Steering wheel
Throttle trigger
Power switch
Foward key
Back key
+/ Enter key
−/ Cancel key
ET1 lever
(Steering trim)
ET2 lever
(Throttle trim)
ET3 lever
(Steering travel)
ET4 lever
(3ch control)
LED indicator
Set button
Battery
connector
Channel 1〜2
connector
Ch1 : Sterring servo
CH2 : ESC or Throttle servo
Power
connector
(KR-212
FHG only)
●Transmitter
（EX-5FH）
●Receiver（KR-211FH/212FHG）
※EX-5UR requires pairing to register the transmitter ID number to the receiver the first time you use.
When operating several receivers (cars) using one transmitter, perform "pairing" for each receivers only first time you use.
Battery box (inside)
※Note polarity and install fresh batteries. Depleted batteries
may deteriorate radio power and cause problems.
※Read instructions included with servo and speed controller before connection and usage.
※Regarding servo and ESC, please refer
each set-supplied instruction manual.
Battery box
R6/AA/UM3 battery
Transmitter (bottom)
Battery cover
Adjust steering and throttle/brake settings ←Refer to P.5
4.
Adjust failsafe ←Refer to P.15
5.
Register the transmitter to the receiver to complete pairing ←Refer to P.5
3.
Install batteries (R6/AA/UM3 size batteries x
8) to transmitter, then install running battery
to electric R/C car. For gas R/C car, install
receiver batteries.
2.
Install receiver, servo, ESC (when using with electric car) and connect cables. Install
receiver noting anti-noise measures. ←Refer to P.4
1.
LCD indicates voltage after a certain period of time.
■ Name of parts／Unit preparation
