DANGER
Product Specifications ......................................................... 1
Warnings .............................................................................. 1
Symbols ............................................................................... 1
General safety rules ............................................................ 2
Specific rules for the scroll saw .......................................... 3
Electrical information .......................................................... 3
Know your scroll saw ......................................................... 4
Assembly and adjustments ................................................. 5
Operation ........................................................................... 9
Maintenance ...................................................................... 11
Parts list ............................................................................ 12
Schematic .......................................................................... 13
PRODUCT SPECIFICATIONS
Model
Motor:
Speed:
Throat depth:
Blade:
TABLE OF CONTENTS
1
WARNINGS
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemical: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are spe-
cially designed to fiter out microscopic particles.
WARNING
SYMBOLS
WARNING ICONS
Your power tool and its Instruction Manual may contain “WARNING ICONS” (a picture symbol intended to alert you to, and/or in-
struct you how to avoid, a potentially hazardous condition). Understanding and heeding these symbols will help you operate your tool
better a. safer. Shown below are some of the symbols you may see.
SAFETY ALERT: Precautions that involve your safety.
PROHIBITION
WEAR EYE PROTECTION: Always wear safety
goggles or safety glasses with side shields.
READ AND UNDERTAND INSTRUCTION MANUAL:
To reduce the risk of injury, user and all bystanders
must read understand instruction manual before using
this product.
KEEP HANDS AWAY FROM BLADE: Failure to
keep your hands away from the blade will result
in serious personal injury.
SUPPORT AND CLAMP WORK
DANGER: Indicates an inminently
hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially
hazardou situation which, if not avoided, could result
in dead or serious injury.
CAUTION: Indicates a potentially hazardou
situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
WARNING
To avoid electrical hazards, fire hazards or damage to the tool, use proper circuit protection. This tool is
wired at the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt / 15 Ampere time delay fuse
or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way.
Before using your tool, it is critical that you read and understand these safety rules. Failure to follow these rules could result
in serious injury to you or damage to the tool.
WARNING
CAUTION
CAUTION
KN SS-16LV
120 V, 60 Hz, 1.2 A
550 to 1600 SPM
16”
5” pinned & pinless
Blade stroke:
Cutting capacity:
Table tilt:
Overall dimension:
Weight:
9/16”
2” to 90º
45º ~ 0º left
26-3/8” x 13” x 14-3/4”
27.5 lb
