ENSAMBLAJE
25
NOTA. Si el perno de profundidad del corte ha sido
ajustado durante la operación del disco abrasivo viejo,
reinicie la profundidad del disco abrasivo nuevo de 14
pulgadas de diámetro. (Ver instrucciones en
la página 25).
Fig. E
1
5
6
3
4
AJUSTE
AJUSTANDO LA PROFUNDIDAD DE CORTE
CON EL PERNO (FIG. F)
NOTA: La profundidad de corte fue ajustada apropiadamente
de fábrica. Si requiere hacer ajustes, sea cuidadoso de no aju-
star la profundidad del perno demasiado, tanto que el disco
de corte abrasivo pueda tener contacto con la base.
1.- Afloje la tuerca de fijación (1) con una llave de 13mm.
2.- Gire el perno de tope de profundidad (2) con una llave
de 13mm hacia la izquierda para disminuir la profundidad
de corte o a la derecha para aumentar la profundidad
de corte.
3.- Baje el cabezal de corte para verificar que el disco no
haga contacto con la base.
4.- Repita el proceso hasta que estén bien ajustados
y apriete la contratuerca.
NOTA:
• Para mantener este ajuste, la contratuerca (1) de
profundidad del perno de seguridad (2) debe estar
bien apretada y segura.
• El tope de profundidad es el de fábrica, ofreciendo la
máxima capacidad de corte para las 14 pulgadas de su
disco abrasivo de su sierra cortadora. Cuando el
diámetro del disco ha reducido en tamaño debido
al desgaste normal, el perno de tope de profundidad
puede requerir ajuste para proveer la mayor
capacidad de corte.
Fig. F
2
1
Summary of Contents for KN CS-3555R
