22
HERRAMIENTAS NECESARIAS PARA EL ENSAMBLADO
INCLUIDO
NO INCLUIDO
Llave para disco
Llave para disco
1.- Saque la sierra cortadora de la caja.
IMPORTANTE: No levante la sierra cortadora del mango
del lado del interruptor (1). Puede provocar una alineación
incorrecta. Levante la máquina con el asa de transporte
(2).
2.- Coloque la Sierra en una superficie de trabajo fija
y segura.
3.- Separe todas las piezas del empaque. Verifique cada una
de ellas con la siguiente ilustración para asegurarse que
se cuenta con todas las partes antes de desechar la caja
de empaque.
Llave ajustable (perico)
Desarmador Phillips
Navaja para
cortar cartón
CONTENIDOS EN LA CAJA
DESEMPACANDO SU SIERRA CORTADORA
2
1
Cortadora
para metal
Para evitar lesiones por un arranque
inesperado o por una descarga eléctrica, no conecte
el cable de alimentación a una fuente de energía
durante el desembalaje y montaje. Este cable debe
estar desconectado cuando se trabaja con la sierra.
Si alguna parte se ha perdido o está da-
ñada, no trate de montar la sierra cortadora o conectar
el cable a la corriente hasta que las piezas dañadas
o perdidas estén correctamente reemplazadas. Para
evitar descargas eléctricas, utilice solamente partes
idénticas de reemplazo de doble aislamiento, cuando
realice el servicio.
ADVERTENCIA
ADVERTENCIA
Summary of Contents for KN CS-3555R
