Stabilisierungskugelkupplung – Montage- und Betriebsanleitung
11
version 4.00/2020 . 209692.002
9.1 Coupling:
-Check the coupling ball on the towing vehicle, clean if necessary
-Place the opened coupling head onto the coupling ball of the towing vehicle. Due
to the vertical load plus any additional load on the drawbar, the coupling head
closes automatically.
If a coupling ball is within the coupling head, the green indicator pin of the en-
gagement indicator will be visible on the top of the coupling head.
Open position for cou-
pling and uncoupling
Closed,stabilisation
deactivated
After coupling, the green cylindrical
surface of the indicator pin MUST
be visible! If not, open the coupling
head again and reconnect correctly!
Hook the breakaway cable of the overrun device into the appropriate eyelet on
the coupling ball or hitch device
Check the light plug for dirt or damage; clean or repair if necessary
Plug the light plug into the socket of the towing vehicle and check that the lights
function correctly
Remove any wheel chocks from the wheels and store them safely
Raise the jockey wheel / supports, pull up if necessary and secure against auto-
matic release or dropping down.
While driving, stabilisation must be activated!
