• 0.1% ~ 99.9%
•NiCr-NiSi K-type sensor
Range
Accuracy
Resolution
°C
-20˜150°C 3°C+2
1°C
°C
150˜300°C 3.0% of rdg+2 digits
1°C
°C
300˜1000°C 3.5% of rdg+10 digits
1°C
Range
Description
Test Condition
Display reads approximate forward voltage of diode
Forward DC current
approx. 0.4mA
Reversed DC voltage
approx. 1.5V
Built-in buzzer sounds if resistance is less than 90Ω
Open circuit voltage
approx. 0.5V
Duty Cycle
Temperature
Diode and Audible Continuity Test
• Overload protection: 250V DC / 250V rms AC
SUPPLIED WITH:
1. When the battery voltage drops below correct operational range, the “ “ symbol will appear on the
LCD display indicating the battery needs replacing
2. Before changing the battery, set the selector switch to OFF position and remove the test leads from
the terminals
3. Open the cover of the battery compartment with a screwdriver
4. Replace the old battery with the same type battery (1 x 9V battery)
5. Close the cover of the battery compartment and tighten the screw
• Test leads: electric rating 1000V 20A
• “K” type thermocouple sensor probe
• Carry Case
BATTERY REPLACEMENT:
