* Provided Hardware.
4. Use the scrap accumulator tray to prop the front door open. Install bracket on
front door first. Use provided bolts, install brass washer against the inside surface
of the door, then spacer, stainless steel washer, and nut on two lower holes as
shown. Use long bolt on upper hole with other existing hardware to secure strap to
door.
5. Remove the nut / bolt assembly on the right side door where bracket will attach. Use the scrap accumulator tray
to prop the front and right side doors open. Install door strap with provided short bolt and other existing hardware
as shown on right side door.
-IMPORTANT CAUTION-
The door handle is spring loaded and will rise to open position when handle link is disconnected from the door.
Page No. 6
6. After right and front doors are attached together, (all three doors
will rise when handle is lifted) disconnect left side door link at han-
dle location to disconnect this door from handle assembly. Reinstall
nut / bolt assembly in handle for future use.
No.
DESCRIPTIONS
No.
DESCRIPTIONS
No.
DESCRIPTIONS
1
P/N 9600421, 1/4” brass washer (4)*
4
P/N 1400462, 1/4-20 nylock nut. (3)*
7
P/N 9660905, Door conn. Strap (1)*
2
P/N 9600430, 5/16 S. S. Washer (3)*
5
P/N 9600423, 1/4-20 x 1/2” long bolt (1)*
8
P/N 9600436, 1/4-20 x 1 1/2” long bolt. (1)*
3
P/N 9600425, 1/4-20 x 3/4” long bolt (3)* 6
P/N 9600819, 1/4” long spacer . (3)*
9
P/N 9640903, Door stop 3/4”
(11/01) Revision F, EO 4109 Part No. 9641606
