Page 8 of 20
0900511 Rev: E (06/05)
•
Continued
*** DISPENSER ***
MEMORY FUNCTIONS
1
MEMORY FUNCTIONS MENU HEADING
This menu selection is used to set the ID number of the external
memory module to match the dispenser‘s ID.
Press YES for a new installation, or if you have changed the
dispenser ID in menu #2. Be sure the unit is not be multi-linked
(with other dispensers) while performing this step.
Press NO if the external memory module ID had been set
previously.
SET EXT MEM MODULE ID ?
PRESS: YES OR NO
NO
YES
You are then asked if you really do want to use this
command. Press YES if you are sure, or press NO to
continue to the next menu selection without setting.
This message indicates that the ID number of
the external memory module is being set to the
dispenser‘s current ID number. When the
process is complete, you will be returned back
to the menu heading.
SETTING EXT MEM MODULE
*** ID TO CURRENT ID ***
ARE YOU SURE ?
PRESS: YES OR NO
YES
NO
This menu selection allows you to clear all time stamp data from
the external memory module.
Press YES for a new installation, or if you wish to clear old data
from the memory module that is no longer needed. Press NO if
you do not wish to clear the memory module (or if you’re not sure)
and you will return to the menu heading.
NOTE: While the memory module can hold a very large amount of
data, it is recommended to periodically clear the module. Be sure
that the old data is no longer needed before proceeding.
CLEAR MEMORY MODULE?
PRESS: YES OR NO
NO
YES
You are then asked if you really do want to use this
command. Press YES if you are sure, or press NO to
return back to the menu heading without clearing.
When the process is complete, you will be
returned back to the menu heading.
CLEARING MEMORY MODULE
************************
ARE YOU SURE ?
PRESS: YES OR NO
YES
NO