background image

Diaphragm Pump NMS 030 

 

Safety 

KNF Micro BA306116-306115 NMS030-EN 0221 

Operating and Installation Instructions 

3.  Safety 

 

Observe the safety precautions in Chapters  
5. Installation and connection and 6. Operation. 

The pumps are built according to the generally recognized rules of 
technology and in accordance with the pertinent occupational 
safety and accident prevention regulations. Nevertheless, dangers 
may occur during their use which may lead to injuries to the user or 
others, or to damage to the pump or other property.  
Only use the pumps when they are in a good technical and proper 
working order, in accordance with their intended use, observing the 
safety advice within the Operating and Installation Instructions, at 
all times. 
Make sure that only trained and instructed personnel or specially 
trained personnel work on the pumps. This especially applies to 
assembly, connection and servicing work. 

Make sure that all personnel have read and understood the Oper-
ating and Installation Instructions, and in particular the "Safety" 
chapter. 

Always ensure adherence to all pertinent accident prevention and 
safety regulations when working on and operating the pump. 

When transferring dangerous media, observe the safety regula-
tions for handling such media. 

Always ensure adherence to all information stickers on the pumps, 
such as flow direction arrows and type plates, and keep stickers in 
legible condition. 

All replacement parts should be properly stored and disposed of in 
accordance with the applicable environmental protection regula-
tions. Observe the respective national and international regula-
tions. This especially applies to parts contaminated with toxic sub-
stances. 

Dispose of all packaging in an environmentally-appropriate 
manner. The packaging materials are recyclable. 

Dispose of end-of-life equipment in an environmentally 
friendly manner. Use appropriate waste collection systems 
for the disposal of end-of-life equipment. Used pumps con-
tain valuable recyclable materials. 

For the purposes of the Machinery Directive 2006/42/EC, pumps 
are “partly completed machinery", and are therefore to be regarded 
as not ready for use. Partly completed machinery may not be com-
missioned until such time as it has been determined that the ma-
chine in which the partly completed machinery is to be assembled 
conforms to the provisions of the Machinery Directive 2006/42/EC. 
The essential requirements of Annex I of Directive 2006/42/EC 
(general principles) are applied and observed. 

 

General Principles No. 1 

 

No. 1.1.2. / 1.1.3. / 1.3.1. / 1.3.3. / 1.3.4. / 1.4.1. / 1.5.8. /  
      1.5.9./ 1.7.4. / 1.7.4.1. / 1.7.4.3. 

 

Personnel 

Working in a 

safety-conscious manner 

Handling dangerous media 

Notes 

Environmental protection 

Disposal 

EU directives/standards 

Summary of Contents for NMS 030 KPDC

















Reviews: