Diaphragm Pump NMS 030
Safety
KNF Micro BA306116-306115 NMS030-EN 0221
Operating and Installation Instructions
5
As these partly completed machinery are OEM-models the power
supplies and the equipment for disconnecting and switching-off the
partly completed machinery respectively have to be considered
when mounting as well as over-current and overload protective
gear.
In addition a protection against mechanical parts in motion, hot
parts, if existing, has to be provided when mounting.
The pumps comply with the safety requirements regarding electro-
magnetic compatibility in Directive 2014/30/EU, if the pump is pow-
ered by an industrially produced power supply which is used within
the specified limits. (Supply voltage motor current, load torque).
The pumps comply with the fundamental requirements of Directive
2011/65/EU (RoHS2).
The following harmonised standards are met::
NMS 030 K_DC
NMS 030 K_DCB
DIN EN 55014-1
DIN EN 55014-1
1)
DIN EN 55014-2
DIN EN 55014-2
DIN EN 60034-1
DIN EN 61000-6-1
DIN EN 61000-6-1
DIN EN 61000-6-3
DIN EN 61000-6-2
Tab. 2
1)
see chapter 5.2
All repairs to the pump(s) must be carried out by the relevant KNF
customer service team.
Only use genuine parts from KNF for servicing work.
Customer service and repairs
