KNF N 2400.15, Operating And Installation Instructions

Page: 3 / 40

Diaphragm pump N 2400.15 About this document
Original-Operating and Installation Instructions, english, KNF 308934-308937 09/18 3
1. About this document
1.1. Using the Operating and Installation
Instructions
The Operating and Installation Instructions are part of the pump.

In several Chapters of these Operating and Installation Instruc-
tions there will be referred to the Operating Instruction of the
motor manufacturer. It is attached to these Operating and In-
stallation Instruction.

Always keep the Operating and Installation Instructions handy
in the work area.

Pass on the Operating and Installation Instructions to the next
owner.
Compliance with the Operating and Installation Instructions is
essential for the safe and reliable operation of the pump. Fail-
ure to do so many results in severe or potentially life-
threatening injury and/or serious damage.
Customer-specific project pumps (pump models which begin with
“PJ” or “PM”) may differ from the Operating and Installation Instruc-
tions.

For project pumps, also observe the agreed upon specifica-
tions.
1.2. Symbols and markings
Warning
WARNING
A danger is located here.
Possible consequences of a failure to observe the
warning are specified here. The signal word, e.g.
Warning, indicates the danger level.

Measures for avoiding the danger and its conse-
quences are specified here.
Danger levels
Signal word Meaning Consequences if not observed
DANGER warns of immedi-
ate danger Death or serious injuries and/or
serious damage are the conse-
quence.
WARNING warns of possible
danger Death or serious injuries and/or
serious damage are possible.
CAUTION warns of a possi-
bly dangerous
situation Minor injuries or damage are
possible.
Tab. 1
Project pump