Diaphragm pump N 2400.15
Installation and connection
Translation of original Operating and Installation Instructions, english, KNF 308934-308937 09/18
19
Fig. 7: Mounting dimensions pump series N 2400.15 STE (All dimensional
tolerances conform to DIN ISO 2768-1, Tolerance Class V)
WARNING
Danger of burns from hot surfaces
Hot surfaces may be caused by overheating of the
pump.
Install the pump so that the motor fan can intake
sufficient cooling air.
When installing, make sure that there are no combustible or
thermally malleable objects placed in the immediate ambient of
the hot pump parts (head, motor).
Make sure that the installation location is dry and the pump is
protected against rain, splash, hose and drip water as well as
other pollutions.
Make sure, that the installation location is accessible for
maintenance and service.
Ensure that the pump is securely attached to the mounting
holes provided. If necessary, fasten the pump to the base plate
with rubber-bonded metals (see accessories, chapter 11; in-
formation on pump weight, chapter 4 Technical Data).
Ensure that there is no access to moving parts (such as from
the bottom of the pump housing).
Cooling air supply
Immediate ambient of the hot
pump parts
Installation location
Summary of Contents for N 2400.15
Page 38: ......
Page 39: ......
Page 40: ...KNF worldwide Find your local KNF partner on www knf com...
