AZURA® Valve Unifier VU 4.1 Instructions V6855
Operation 29
7.6.5
Output
In this submenu, the output control can be set to event or to trigger.
Process
Figure
1.
Change to Output display: Main Display >
Drive Setup > Out.Pin
2.
Press selection button.
3.
Change the setting (Event/Trigger) via the
navigation buttons.
4.
Finish the process by pressing the confirma-
tion but ton.
Out.Pin
Even
t
7.7
Setting to standby
Process
Figure
1.
Keep the selection button pressed for about
3 seconds.
2.
Standby is shown on the display and the sta-
tus LED on the device lights blue.
STANDBY
0
3.
To change to normal operation again, keep
the selec tion button pressed for 3 seconds.
4.
The main menu is shown on the display and
the status LED on the device lights green.
POS
1 / 4
W
7.8
Setting valve position to Home
In this submenu, the valve position can be set to Home.
Process
Figure
1.
Change to main menu point Rehome Drive.
2.
Press confirmation button.
REHO
DRIVE
ME
