AZURA® Valve Unifier VU 4.1 Instructions V6855
Unpacking and setup 12
6.4
Mounting the valve onto the valve drive
Tools: Screwdriver, TX 10
Process
Figure
1.
Loosen the screws
1
of the
adapter
2
until resistance
using the screwdriver.
Fig. 3:
Loosening the screws
1
2.
Mount the valve
4
onto the
drive coupling
3
. The port 1 of
the valve has to point up.
3.
Using the screwdriver, tighten
the screws
1
of the adapter
2
.
Fig. 4:
Mounting the valve
3
4
6.5
Connecting the device to the computer
Note:
IHPLC devices made by KNAUER work only with IP adresses which
are assigned via IPv4. IPv6 is not supported.
This section describes how to set up an HPLC system in a local area net-
work (LAN) and how a network administrator can integrate this LAN into
your com pany network. The description applies to the operating system
Windows and all conventional routers.
2
