KMT STREAMLINE S30, Operation And Maintenance Manual, Page: 241 / 261

LUBRIPLATE

MATERIAL SAFETY DATA SHEET
Section 1
PRODUCT NAME OR NUMBER: FORMULA:
LUBRIPLATE Super FML-0, FML-1, FML-2 Calcium Soap, USP Mineral Oil and Additives
GENERIC/CHEMICAL NAME: NSF Registration No’s:
Petroleum Lubricating Grease 125742, 125740, 125741
Manufacturer's Name: Emergency Telephone Number:
Fiske Brothers Refining Co. 1-800-255-3924 - CHEM-TEL (24 hour)
Address: Telephone Number for Information:
1500 Oakdale Ave., Toledo, Ohio 43605 - 129 Lockwood St., Newark, NJ 07105 419-691-2491 - Toledo Office
Section 2 - Hazardous Ingredients/Identity Information
Hazardous Components OSHA PEL ACGIH TLV Other Limits Recommended % (optional)
Non-hazardous
Hazardous Material Identification System (HMIS): Health - 1, Flammability - 1, Reactivity - 0
Not a Controlled Product under (WHMIS) - Canada Special Protection: See Section 9
Section 3 - Health Hazard Data
Threshold Limit Value: 5 mg/m3 for oil mist in air. OSHA Regulation 29 CFR 1910.1000
Effects of Overexposure: Prolonged or repeated skin contact may cause skin irritation. Product contacting the eyes may cause eye
irritation. Human health risks vary from person to person. As a precaution, exposure to liquids, vapors, mists and fumes should be
minimized. This product has a low order of acute oral toxicity, but minute amounts aspirated into the lungs during ingestion may cause mild
to severe pulmonary injury.
Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No
Section 4 - Emergency and First Aid Procedures
EYE CONTACT: Flush with clear water for 15 minutes or until irritation subsides. If irritation persists, consult a physician.
SKIN CONTACT: Remove any contaminated clothing and wash with soap and warm water. If injected by high pressure under skin,
regardless of the appearance or its size, contact a physician IMMEDIATELY. Delay may cause loss of affected part of the body.
INHALATION: Vapor pressure is very low and inhalation at room temperature is not a problem. If overcome by vapor from hot product,
immediately remove from exposure and call a physician.
INGESTION: If ingested, call a physician immediately. Do not induce vomiting.
Section 5 - Fire and Explosion Hazard Data
Flash Point (Method Used): COC - 435oF Flammable Limits: LEL 0.9% UEL 7.0%
Extinguishing Media: Foam, Dry Chemical, Carbon Dioxide or Water Spray (Fog)
Special Fire Fighting Procedures: Cool exposed containers with water. Use air-supplied breathing equipment for
enclosed or confined spaces.
Unusual Fire and Explosion Hazards: Do not store or mix with strong oxidants. Empty containers retain residue.
Do not cut, drill, grind, or weld, as they may explode.
KMT 20416107