KMS Fuel/FA23 manual
Version 3.01
13
3.2.4.1.7
AUX 1 (Second stage on older Fuel system)
The system features one extra output. This
extra output can be separately activated via
direct ground (up to 15 W) or via relay. It can
be used for shift indicators, water injection,
cooling fan, H
2
O switching, etc. There is a
choice of several combinations of input
quantity to activate the AUX output. The AUX
output is activated when both the values set
are exceeded. If 'none' is selected, this
channel will be ignored.
A hysteresis can be set for the AUX output.
This means that the switching ON value can
be set higher than the switching OFF value.
The advantage of this is that the output does
not need to be switched on and off
unnecessarily. An example is a cooling fan
that activates at 90 degrees and deactivates
at 85 degrees. You can name this AUX output
freely with a maximum of 2 x 8 characters.
Second stage on older Fuel systems :
This menu enables a second stage to be
activated at a certain engine speed or engine
load. So an extra output can be activated,
providing an ground-switching output directly
(up to 15 watts) or via a relay. This can be
used for a shift light or water injection, for
example.
