Technical manual
360-drive page 8 of 26
3.3 General safety measure
- Read the manual always carefully prior to starting work, and follow the instructions
- Use this 360-drive only for the purpose for which it was intended and designed.
- Ensure that the recommendations on voltage (V) and frequency (Hz) are followed. The charger of the
360 drive must only be connected to a grounded AC outlet.
- Keep the 360 drive in good working condition by periodic safety inspections. Rectify immediately any
unsafe situations, or tag unsafe for use.
- The 360-drive may only be used after it has been reviewed and found to be correct with regard to
damage, functioning and completeness.
- Switch off the 360-drive for the servicing and transport and disconnect the battery terminals.
- Allow only qualified, properly trained personnel to operate the 360-drive or attempt maintains the
360-drive. The 360 drive may only be operated by one person.
- The user must have sufficient visibility on the road which should be free of obstacles and people.
- The user must choose speed and distance, in the unlikely event that its path is blocked, he must
always be able to stop the 360-drive and hold it in place.
- The user must be sure that he or others cannot be trapped.
- The 360-drive should not be left with the key in the ignition. In this way, unauthorized use is
prevented.
- The 360 drive should be left with the parking brake applied when not in use.
- Work on mounting, installation, adjustment, electrical connection, maintenance and repairs should
only be performed by qualified personnel.
- Stay out of the path of the moving and / or rotating parts of the 360 drive when it is in operation and
be careful of sharp edges and corners.
- When driving with the 360 drive any load should be properly plugged and / or fixed.
Activities not included in this documentation, should be carried out by staff or
in consultation with Konga Mekaniska.
This documentation is part of the machine!
Keep this documentation carefully. It contains information, which later can be
useful or necessary for example for repair and maintenance.
Konga Mekaniska can optionally supply an extra copy.