klover pellet boiler 24 User Manual Download | Manualshive

Page: 3 / 48

background image

3

Dear Customer,

we would firstly like to thank you for choosing a “

KLOVER

” boiler and we hope you

will be satisfied with this product.

We recommend that you read the warranty certificate carefully, which you will find on the last page of this

User Guide

; call the Authorised Technical Assistance Centre (TAC) immediately for commissioning and

validation of your warranty.

We would like to thank  you again for trusting KLOVER products and  we also inform  you that these models
are the result of forty years experience in the field of construction of solid fuel products which uses water as
heat carrying fluid.
Every part that composes the boiler has been built by qualified staff, using the most modern equipment.

The  manual  contains  a  detailed  description  of  the  boiler  and  its  functioning,  instructions  for  proper
installation,  basic  maintenance  and  control  points,  which  must  be  periodically  performed;  furthermore  it
contains  practical  advice  which  helps  to  obtain  maximum  performance  from  the  stove-boiler  with  minimum
fuel consumption.

The heat input produced by the boiler can change according to the pellet that you use.

Enjoy the heat with KLOVER!

Technical Support

Klover pellet stoves are imported and distributed by FirePower Heating, Capton, Dartmouth, Devon, TQ6
0JE.
UK technical and product support is provided by FirePower Heating who can be reached on 0844 3320156.

Copyright

All rights reserved. The reproduction of any part of this manual, in any form, without the explicit written
permission of KLOVER srl is forbidden. The content of this manual can be modified without forewarning.
Although we have carefully collected and verified the documentation contained in this manual, KLOVER srl
cannot be held liable for how you utilise it.

Copyright © 2010 KLOVER srl

Latest revision: 1.0

– May 2013

«
1
2
3
4
5
...
»

Summary of Contents for pellet boiler 24

















































Reviews:

No comments

Related manuals for pellet boiler 24

Brand: Laars Pages: 118

Brand: Radiant Pages: 72

ecoTEC plus 938

Brand: Vaillant Pages: 72

Brand: U.S. Boiler Company Pages: 6

Classic Slimline FF 230

Brand: IDEAL Pages: 40

Brand: Trianco Pages: 18

Brand: Lamborghini Caloreclima Pages: 68

Brand: U.S. Boiler Company Pages: 92

Brand: PeerlessBoilers Pages: 59

ELTHERM M Series

Brand: green ecotherm Pages: 34

Brand: Unical Pages: 48

Brand: Strebel Pages: 30

SureFlow Compact Series

Brand: Instanta Pages: 8

Roca LIDIA 20 GT EM

Brand: Baxi Pages: 3

Brand: Baxi Pages: 40

Nuvola 3 BS 140 Fi

Brand: Baxi Pages: 224

Brand: Viessmann Pages: 168

Brand: Vaillant Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands