6
7
IV-Advanced operation
Note:
Pairing the headset with your computer
Before installing this product, please make sure your device has a built-in
Bluetooth
feature available. You can pair up to eight devices to your KHS-630
headset.
Make sure the headset is off.
Activate the
Bluetooth
program in your PC to begin setup.
The “Search new device” screen will be displayed.
Place both devices not more one meter away from each other.
Slide the power switch up to turn the headset on. The green and blue LED will
alternate quickly indicating that the device has entered into pairing mode.
Select
KHS-630
as soon as the system detects the headset. Double click on the
icon representing the headsets.
The software may activate the passkey window and ask you to enter the PIN
code =“0000” (4 zeros). Otherwise, the wireless connection will be established
automatically with the remote device.
If the pairing is successful, the green status LED will start blinking slowly. If after
60 seconds the pairing process fails, please repeat steps 1 through 7 described
above.
The headset will go automatically into standby mode after a short period of
inactivity.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Pairing the headset with your portable device
Make sure the headset is off.
Set your
Bluetooth
device to “discover” the wireless headset.
Place both devices not more than one meter away from each other.
Slide the power switch up to turn the headset on. The green and blue LED will
alternate quickly indicating that the device has entered into pairing mode.
Select
KHS-630
as soon as your portable device detects the headset.
Accept by pressing
Yes
or
OK
on the device. If prompted, enter the passkey =
0000 (4 zeros). Your device will confirm when pairing is complete.
If the pairing is successful, the green status LED will start blinking slowly. If after
60 seconds the pairing process fails, please repeat steps 1 through 6 described
above.
The headset will go automatically into standby mode after a short period of
inactivity.
1.
2.
3.
4.
5.
6.
7.
8.
Using the
Bluetooth
wireless headset
1. Answering and ending a call using your mobile phone
When there is an incoming call, your phone will ring.
Briefly press the MFB button to pick up. You may also press the answer button
on your cellular phone to receive the call in your headset.
To end a call, simply press the MBF once again. Likewise, you may also finish the
call directly using the controls on your cell phone.
•
•
•
