4
5
Foldable and adjustable headband
Power switch:
slide up to turn it on/down to turn it off.
Multifunction button (MBF):
>>/V+:
press this button once to select the next track. Press and hold to
increase the volume of the unit.
<</V-:
press this button once to select the previous track. Press and hold
to lower the volume of the unit.
Charging socket:
insert the mini-USB plug here.
3.5mm jack:
for wired playback.
Built-in microphone:
picks up your voice.
Micro-SD card slot:
insert the micro-SD card here.
LED status indicators:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
•
•
•
•
•
•
•
•
Press it to start and pause music playback. When using the phone feature,
press this button to answer, ignore or end a call.
Press and hold this button to switch modes. The available modes are:
3.5mm, SD card and
Bluetooth.
Solid red:
indicates the headset is charging when the device is off.
Alternating green and blue LED:
indicates headset has entered into the
pairing mode and is ready to be detected for the first time.
Blinking blue and green simultaneously:
indicates the battery is running
out of power.
Blinking green slowly:
indicates the headset has connected to the
Bluetooth
device.
Blinking blue slowly:
indicates that the micro-SD card has been detected.
Solid blue:
indicates that the 3.5mm connection has been detected.
III- Basic operation
Charge your headset
Turning your headset on and off
Plug the supplied USB cable into the USB port of your computer or to a 5V
USB adapter to charge the battery. The headset must be turned off while
charging.
Make sure that your KHS-630 headset is fully charged before using it for the
first time.
The headset battery has to be initially charged for at least for 4 hours.
Thereafter, the battery will take from 2 to 3 hours to recharge.
While charging, the LED will be solid red. When the battery has reached full
capacity, the red LED will turn off.
•
•
•
•
Slide the power switch up to turn the headset on.
Slide the power switch down to turn off the device.
Note:
during power on, if the 3.5mm connection is detected, then it becomes the
primary mode for the headset.
1.
2.