ILav65 Instruction Manual
6. Replace the wiper.
14.7. CLEAN WATER FILTER CLEANING
The clean water filter is fitted under the machine's floor, on the right side. Its position is
also indicated by the wording on the right side of the solution tank. The filter has the
purpose of preserving the solenoid valve controlling solution flow rate from any debris
or sediment there might be in the solution tank.
It is recommended to clean the filter weekly.
In order to clean it unscrew the cup, remove the filter inside it and wash it under running
water. Replace it and fit the cup back in.
.
14.8. EXTRACTION FILTER CLEANING
The mesh filter is fitted inside the recovery tank, directly fitted onto the end of the
vacuum turbine suction cone. The purpose of the filter is to protect the turbine from the
ingress of foreign matter which might enter through the extraction cone.
It is recommended to clean the filter weekly.
To clean the filter, just remove it and wash it under running water. Fit it back onto the
cone, taking care to fit it securely onto it.
13/08/14 Rev: 2.0.
0 (
TRANSLATION FROM THE ORIGINAL
LANGUAGE)
40
Summary of Contents for ILav65
Page 9: ...ILav65 Instruction Manual 13 08 14 Rev 2 0 0 TRANSLATION FROM THE ORIGINAL LANGUAGE 9...
Page 25: ...ILav65 Instruction Manual 13 08 14 Rev 2 0 0 TRANSLATION FROM THE ORIGINAL LANGUAGE 25...
Page 35: ...ILav65 Instruction Manual 13 08 14 Rev 2 0 0 TRANSLATION FROM THE ORIGINAL LANGUAGE 35...
