ILav65 Instruction Manual
11. MACHINE PREPARATION AND COMMISSIONING
11.1. MACHINE START UP
NOTE: Before operating the machine, perform preliminary inspection.
FOR SAFETY
Before starting the machine, ensure all safety devices work correctly.
1. The operator must be on the drive seat and keep his left foot on the brake pedal. To
avoid any unintentional movement, the accelerator pedal must not be pressed.
NOTE: To move the machine in the desired direction, the operator must be seated in the
driving seat,
since a safety device that detects the seated operator is installed under the
seat
.
2. Turn the ignition key clockwise in the “ON” position.
3. Check the set travel direction, and select it on the Forward or Backward selector.
4. With operator seated and key ON the parking brake is automatically released. Now
slightly press the accelerator pedal and move the vehicle into the filling area, by turning
the steering wheel.
11.2. MACHINE FILLING
FOR SAFETY
Before leaving the machine unattended or performing any maintenance operation,
ensure it is on a flat surface, engage the parking brake, turn off the machine and remove
the key.
1. Lift the entire brush plate and turn the start key OFF anticlockwise to turn off the
machine.
2. Rotate the solution tank cover.
3. The solution tank may be filled to maximum filling capacity (70 litres), paying
attention to the level shown in the small gauge pipe located on the side of the tank,
under the filling spout.
13/08/14 Rev: 2.0.
0 (
TRANSLATION FROM THE ORIGINAL
LANGUAGE)
23
Summary of Contents for ILav65
Page 9: ...ILav65 Instruction Manual 13 08 14 Rev 2 0 0 TRANSLATION FROM THE ORIGINAL LANGUAGE 9...
Page 25: ...ILav65 Instruction Manual 13 08 14 Rev 2 0 0 TRANSLATION FROM THE ORIGINAL LANGUAGE 25...
Page 35: ...ILav65 Instruction Manual 13 08 14 Rev 2 0 0 TRANSLATION FROM THE ORIGINAL LANGUAGE 35...
