installation manual
3
4. ATTACHED FITTINGS
Please check whether the following fittings are of full scope. If there are some spare fittings , please restore them carefully.
Both side covers may be installed on 42K-48K unit already, or be put into the accessories.
Keep indoor unit, outdoor unit, power supply wiring and
transmission wiring at least 1 meter away from televisions
and radios. This is to prevent image interference and
noise in those electrical appliances. (Noise may be
generated depending on the conditions under which the
electric wave is generated, even if 1 meter is kept.)
There is enough room for installation and maintenance.
The ceiling is horizontal, and its structure can endure the
weight of the indoor unit.
The outlet and the inlet are not impeded, and the
influence of external air is the least.
The air flow can reach throughout the room.
The connecting pipe and drainpipe could be extracted out
easily.
There is no direct radiation from heaters.
5. INDOOR UNIT INSTALLATION
5.1 Installation place
(Refer to Fig.5-1,Fig.5-2,Fig.5-3 and Table 5-1 for specification.)
The indoor unit should be installed in a location that meets
the following requirements:
CAUTION
Fig.5-1
≥
35mm
≥
1000mm
≥
35mm
≥
35mm
QUANTITY
SHAPE
NAME
1.Hook
7. Owner's manual
8. Installation manual
9. Remote controller manual
3. Remote controller
4. Remote controller holder
6. Alkaline dry batteries (AM4)
2.Hanging arm
2
2
2
1
1
Installation fittings
Remote controller & Its Holder
Others
5. Mounting screw(ST2.9×10-C-H)
1
10 .Transfer connector( 12.7- 15.9)
(Packed with the indoor unit )
(NOTE: Pipe size differ from appliance
to appliance.To meet different pipe size
requirement, sometimes the pipe
connections need the transfer connector
to install on the outdoor unit .)
11 .Transfer connector( 6.35- 9.52
)
(Packed with the indoor unit )
(NOTE: Pipe size differ from appliance
to appliance.To meet different pipe size
requirement, sometimes the pipe
connections need the transfer connector
to install on the outdoor unit .)
12 .Transfer connector( 9.52- 12.7)
(Packed with the indoor unit,used for
multi-type models only )
(NOTE: Pipe size differ from appliance
to appliance.To meet different pipe size
requirement, sometimes the pipe
connections need the transfer connector
to install on the outdoor unit .)
1
(on some models)
1
(on some models)
1
(on some models)
2
(on some models)
1
(on some models)
1
(on some models)
