Klemsan Klea 320P-D, User Manual

Page: 46 / 126

46
4
Quadrant
Energy Analyzer
4
Quadrant
Energy Analyzer
SECTION 3 MENUS
Assume also that Digital input1 mode had been adjusted as“counter”. In this case, when
Counter1 reaches 100 or multiples of 100, a pulse of 100 msec will be will be generated
at the output pins DO1- and D01+.
Assume that the digital input 1 counter value was 35 before multiplier adjustment.
Assume also that operator adjusts ‘Multiplier’ as 100. Under these conditions, Output
1 generates a pulse when digital input 1 counter reaches the values 135, 235, 335, 435
and so on.
3.2.1.1.5.2 Output Menu
Output 2 applications and settings are the same as Output1. Output generates pulse
from DO2+ and DO2- pins.
3.2.1.1.5.3 Output3 Menu (optional)
Output 3 applications and settings are the same as Output1. Output3 generates pulse
from DO3+ and DO3- pins.
3.2.1.1.5.4 Output4 Menu (optional)
Output 4 applications and settings are the same as Output1. Output4 generates pulse
from DO4+ and DO4- pins.
3.2.1.1.5.5 Output5 Menu (optional)
Output 5 applications and settings are the same as Output1. Output5 generates pulse
from DO5+ and DO5- pins.
3.2.1.1.5.6 Output6 Menu (optional)
Output 6 applications and settings are the same as Output1. Output6 generates pulse
from DO6+ and DO6- pins.
3.2.1.1.5.7 Output7 Menu (optional)
Output 7 applications and settings are the same as Output1. Output7 generates pulse
from DO7+ and DO7- pins.