Klein Marine Systems, Inc. MA-X VIEW 600, Operation And Maintenance Manual

Page: 90 / 128

B-4
APPENDIX B Configuring and Updating the SP-III TPU
MA-X View 600 Sonar System Operations and Maintenance Manual P/N 11210097, Rev. 00
5.
Enter the SP-III TPU IP address in the
Enter TPU IP Address
text box if it is
different than the default address, or click
Default Addr
if it is the default. The
default address is 192.168.0.81. The address will already be displayed if it was
queried or changed as described in “Querying or Changing the SP-III TPU IP
Address” on page B-2.
6.
Click
Edit startup.ini
.
Windows Notepad opens with the contents of the startupCdi3000.ini file
displayed.
7. Make the required changes to the startupCdi3000.ini file as required, and then
exit Notepad.
Notepad exits and the changed file is saved. The SP-III TPU software restarts
and a window opens confirming the file update:
B.4 Updating the SP-III TPU Software
Updates to the SP-III TPU software are supplied as compressed archive files and
must reside on the laptop computer.
To update the SP-III TPU software:
1.
Connect the supplied Ethernet cable to the LAN connector of the SP-III TPU
and to the Ethernet port of the laptop computer.
2. Turn on the laptop computer and wait for the Windows desktop to appear.
3. Turn on the SP-III TPU by switching the A/C-D/C switch to A/C for AC
operation or to D/C for DC operation.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
5. Enter the SP-III TPU IP address in the
Enter TPU IP Address
text box if it is
different than the default address, or click
Default Addr
if it is the default. The
default address is 192.168.0.81. The address will already be displayed if it was
queried or changed as described in “Querying or Changing the SP-III TPU IP
Address” on page B-2.