manualshive.com logo in svg

Klein Marine Systems, Inc. MA-X VIEW 600, Operation And Maintenance Manual

Share
Download
Klein Marine Systems, Inc. MA-X VIEW 600 Operation And Maintenance Manual Download Page 87

B-1

APPENDIX B: C

ONFIGURING

 

AND

 U

PDATING

 

THE

 SP-III TPU

SP-III TPU is configured at the factory. However, should changes be required, 
configuring and updating the SP-III TPU can be performed using Linux Updater. 
This program is automatically installed when installing SonarPro 14.0 and can be 
used to perform the following tasks:

• Query or change the IP address of the SP-III TPU.

• Edit the startup file of the SP-III TPU.

• Download and install software updates to the SP-III TPU.

B.1 Starting Linux TPU Updater

Linux TPU Updater is started by double-clicking the Linux TPU Updater icon 

 

on the Windows desktop. The 

Klein Linux TPU Updater

 dialog box will open as 

shown Figure B-1.

Figure B-1:  

The Klein Linux TPU Updater Dialog Box

Summary of Contents for MA-X VIEW 600

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands