Connecting the Topside System Components
3-9
TOWFISH:
Type N coaxial connector that connects to the
towfish or to the slip rings of the optional winch.
AC INPUT:
IEC type connector that connects to the AC power
source.
3.5.3 SonarPro Workstation Connections
All the connections to the SonarPro Workstation are made to connectors on the
back panel which is shown in Figure 3-3.
The SonarPro Workstation connectors are the following:
USB:
USB connectors (4, plus 2 on the front panel). Any
two connect to the keyboard and the mouse. The
front panel USB connectors are shown in Figure 3-5
on page 3-19.
DVI:
DVI connector that connects to the monitor.
ETHERNET:
RJ-45 connectors (2). Any one connects to the LAN
connector on the SP-III TPU or Rack Mount TPU.
AC INPUT:
IEC type AC input connector that connects to the
AC power source.
3.6
Connecting the Topside System Components
The topside system components are connected using KMS or user supplied cables.
Two system configurations are included, one that includes the SP-III TPU and the
laptop computer, and the other that includes Rack Mount TPU and the SonarPro
Workstation.
3.6.1 Connecting the SP-III TPU and the Laptop Computer
The following supplied cables are used to connect the SP-III TPU and the laptop
computer:
• Ethernet crossover cable
• DC power cable
• AC power cable
• Tow cable
Summary of Contents for MA-X VIEW 600
