Klavis
Logica
XT
user manual V1.0
Page
1
of
11
Logica
XT
Voltage-controlled multiple-input logic and gate processor
Introduction
Built upon the foundations of its acclaimed predecessor, this new version drastically expands the
feature set within the same footprint. All the original goodies are still there, now enriched by a
full list of state-based logic functions including a delay line. Faster processing allows perfect
handling of audio signals. User editable settings are stored in non-volatile memory.
With its versatility and features never seen before, the Klavis Logica XT will arouse your creativity
and bring inventiveness to your soundscapes.
Logica
Klavis
Div/2
Mode
& CV
Out
Inv.
XT
Manual
On
Or
And
Xor
1 Low
Even
Xtra
1
2
3
Clk
In
Clr
Clk
Set
Rst
Gater
1,2,3
Coin
D.S&H
1 High
Off
Gt~Tr
S/R. C
Features at a glance
14 modes of operation:
o
6 basic logic functions
o
2 forced states
o
6 advanced logic functions:
The Gater adds-up multiple gate signals while
maintaining each triggering with adjustable retrigger
gap time
Gate to trigger with adjustable pulse length
Chronological sequence validation (safe locker)
Toss a coin with different chance weighs from the 3
inputs
Flip-flop with separate Set and Reset
Digital Sample & hold, with adjustable delay/memory
line (from milliseconds to several seconds)
3 normalized input jacks + user defined manual button for quad
signal handling
Settings stored in non-volatile memory
Simultaneously normal and inverted outputs (e.g. And & Nand)
Dedicated divider by two output
Continuous Bipolar CV control of the mode
LED column telling the current operation mode
LEDs on all outputs indicating the state
LED on manual button indicating its default status
Low consumption, skiff-friendly & compact module
