Operating Instruction
Healthcare chiller of the KSC Series
Version „Revision 09“
Type KSC 215-L-U/S
page 21von138
\\FILER02\Allgemein\02 - Technische Unterlagen KKT\Originale\830xxx Bedienungsanleitungen\KSC\83002302.Ka KKT chillers_KSC215-US.doc
5
Transport
Transport
on
company
premises may be done with a
forklift truck. The appliance
must however be kept in an
upright position and on no
account tipped to the side. A
visual inspection should be
made on delivery to check for
any
damage.
Complaints
should be made immediately
to the haulage contractor and
the insurance company must
be notified at once. When
transporting by crane,
please ensure that the
housing is not subjected to
pressure at the sides.
Place the lifting tubes in the
holes in the feet at the base
of the chiller. Lock the ends of
the tubes in position with
locking pins and split pins as
shown.
The capacity of the lifting gear
must be adequate to lift the
load in question.
Check the weight of the chiller
units,
the capacity of the lifting gear
and ropes
and the condition and
suitability of the
aforementioned equipment.
Weight and dimensions see
“Data sheet”, chapter 4.1
