50
Cooking guidelines
13. Hints and Tips
Problem
Possible causes
What to do
F3/F4
Temperature sensor of the induction
coil failure
Please contact the supplier.
F9/FA
Temperature sensor of the IGBT
failure.
Please contact the supplier.
E1/E2
Abnormal supply voltage
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E3
High temperature of the induction
coil temperature sensor.
Please contact the supplier.
E5
High temperature of the IGBT tempe-
rature sensor
Please restart after the hob cools down.
The above measures are an excerpt of possible causes.
Never make changes yourself or dismount the hob to prevent injury or accidents.
What?
How?
Important!
Spillovers on
the
touch controls
1. Switch the power to the cooktop off.
2. Soak up the spill
3. Wipe the touch control area with a
clean damp sponge or cloth.
4. Wipe the area completely dry with a
paper towel.
5. Switch the power to the
cooktop back on.
• The cooktop may beep and turn itself
off, and the touch controls may not
function while there is liquid on them.
Make sure you wipe the touch control
area dry before turning the cooktop
back on.
Soiled metal
grease filter of
the hood
1. Remove the cover and take out the
grease filter.
2. Soak the filter in hot soapy water,
clean it with a soft brush and rinse well
with hot water. (If necessary, repeat the
process.)
3. The metal fat filters can also be clea-
ned separately from the dishes in the
dishwasher in a standard program with
55 ° C. (If necessary, soak in hot soapy
water first.)
• Avoid using alkaline dishwasher
cleaning agents (ph value over 7).
• Frequent cleaning or the use of ag-
gressive cleaning agents can cause co-
lor changes of the metal surface. These
have no influence on the filter function
and are not a reason for complaint.
