39
Using your Induction Hob
Adjust heat setting by touching the the
slider control.
• If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
• You can modify the power level from 0 to 9
By the slide control.
power up
power
down
1.
Touch the ON/OFF control.
After power on, the buzzer beeps once, timer control
shows „00“, heating zone selection controls show
„ “, or „ “ or „ “, indicating that the induction
hob has entered the state of standby mode.
2.
Place a suitable pan on the cooking zone that
you wish to use.
Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control,
and a indicator next to the key will flash.
6. Using your Induction Hob
6.1 To start cooking
EN
