54
Installation
9.5 Connecting the hob to the mains power supply
• The connection to the power supply must be carried out by a
qualified electrician in accordance with the relevant standard
or with a single-pole circuit breaker, as described below:
• The electrical connection must be made properly and
in accordance with the applicable safety regulations.
• If the appliance is being connected directly to the mains supply,
an omnipolar circuit breaker must be installed with a minimum
gap of 3mm between the contacts.
• To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and
fire.
• If the cable is damaged or needs to be replaced, this must be done by
a qualified electrician with the correct tools to avoid any accidents.
• The installer must use the H05GG-F power cord.
• The cable must not be kinked or pinched.
• The cable must be checked regularly.
