35
Using your induction hob
6. Using your induction hob
6.1 To start cooking
EN
1.
Touch the ON/OFF control.
After power on, the buzzer beeps once, timer control
shows „00“, heating zone selection controls show
„ “, or „ “ or „ “, indicating that the induction
hob has entered the state of standby mode.
2.
Place a suitable pan on the cooking zone that
you wish to use.
Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3.
Touching the heating zone selection control,
and a indicator next to the key will flash.
4.
Adjust the heat setting by moving your finger over
the slider control or tap the desired intensity level
directly on the slider bar.
• If you don’t choose a heat setting within 1 minute,
the ceramic hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
• You can modify the power level from 0 to 9 by the
slider control.
Power up
Power down
Tap directly
