53
Using the dishwasher
3.3 Set up the water softener
The water softener has to be set manually. This feature is built in
your device to remove minerals and salt from the water, which
would have a detrimental or adverse effect on the operation of the
appliance. The higher the amount of these particles, the harder the
water is. The softener should be adjusted according to the hardness
of the water in your area of living. Inform yourself at your local water
authority about these values.
EN
Important Information
The next refilling of salt in a dishwasher refilling of 500 ml of wa
-
ter in the reservoir of the water softener is not necessary.
• Carefully screw the cap back on.
•
Usually, the salt warning light will be off in 2-6 hours
after the salt container is filled with salt.
If it lights up again, you should repeat the salt filling
procedure described above.
Setting:
• Hold down the button and press
the button for about 5 seconds. The
buzzer rings one time and H4 appears on
the screen (standard value).
• To change the value according to the
table, press button till you have
reached it.
• Press to store your setting.
°Clark Range
Mmol/l
Value
—
0–8
soft
0–1.1
H0
9–10
soft
1.2–1.4
H1
11–12
medium 1.5–1.8
H2
13–15
medium 1.9–2.1
H3
16–20
medium 2.2–2.9
H4
21–26
hard
3.0–3.7
H5
27–38
hard
3.8–5.4
H6
39–62
hard
5.5–8.9
H7
+
