KKT KOLBE EB8013ED, User Manual

Page: 38 / 40

38
Installation and connection of the appliance / Technical details
Installing the appliance
• The stability of the furniture must comply with DIN 68930.
• On the built-in niche no back wall may be present, so that
the ventilation is ensured.
• Push the device all the way into the niche.
•
Open the oven door and fasten the left and right with the
supplied four screws and sleeves on the cabinet. Do not
overtighten the screws.
Turning on the appliance
• Remove all packaging materials and possibly remove pro-
tective films.
• Clean the oven and the accessories just moist.
• Set the current time to the timer (on some models only).
• Operate the empty oven for about 30 minutes with top
and bottom heat and maximum temperature. The resul-
ting typical smell of a brand is unavoidable. Please ven-
tilate the room.
What to do in case of problems?
Warning - Risk of electric shock!
Incorrect repairs are dangerous!
Repairs and the replacement of a damaged power cable
may only be carried out by a certified electrician.
If the appliance is defective, unplug the appliance from
the mains or switch off the circuit breaker in the fuse box.
Contact a certified electrician or the customer service.
The oven doesn’t heat up.
• Has the fuse in the domestic installation been triggered?
• Have the temperature and heating mode been set correctly?
The device fuse keeps blowing.
• Contact the customer service or a licensed electrician.
Lighting has failed.
• To replace the lighting, see corresponding chapter.
The cooking result is not satisfactory.
• Have the recipe instructions correctly been followed and
have the application guidelines in this manual been folloed?
KKT KOLBE customer service
Tel. 0049 9502 667930
Mail:
info@kolbe.de
www:
www.kolbe.de
→ You can find further data and documents
on our website at Support-Center .