kiwy SL 123, Instruction Manual

Page: 22 / 145

10
• In case of buckle malfunction, do not use this seat and consult your detailer.
VII. carE & MaIntEnancE InstructIons
! warning! Never lubricate any component of your child seat, just keep
it nice and clean.
• Plastic parts can be easily cleaned by using just soapy water; never use
solvents, alcohol or any harsh cleaning agents.
• Cleaning: when your cover gets dirty, remove it (see below) and hand-
wash it at 30°; do not use chemical cleaners; do not machine-wash; do
not wring, nor tumble-dry; do not iron. Please observe the instructions
on its washing label.
in reverse order.
coVEr MaIntEnancE
In case of light soiling, sponge the fabric cover with a mild detergent and
warm water. Or, refer to the care label attached to the fabric cover.
MatErIals
Frame: Polypropylene – High density Polyethylene - Polyamide - Steel
Cover: 100% Polyester
MEasurEMEnts
L: 49 cm; H: 71 cm; W: 44 cm.
rEMoVInG thE FaBrIc coVEr
Remove the safety harness completely as shown in diagrams 1
7to
2
0
. Release the
cover from the four buttons located at the rear of the backrest
( Fig.23)
.
To remove the seat cover stretch the lower elastic edge and remove the
cover by sliding it over the armrests.
The cover can be washed following the instructions on the label inside the
cover.
To place the cover back on to the child car seat, repeat these operations,