14
15
Parameter settings
In preview mode, press the “M” key to enter the menu interface, then press the “<” or “>” key to move the cursor left or
right and press the “+” or “-” key to move the cursor up and down. After selecting the menu, press the “OK” key to set
the selected menu and press the “M” key again to exit.
a. Parameter setting for video recording
1. Video resolution
The optional resolutions for video recording are:
1080P @ 30 FPS
1920 x 1080
16:9
960P @ 30 FPS
1280 x 960
4:3
720P @ 60 FPS
1280 x 720
16:9
720P @ 30 FPS
1280 x 720
16:9
WVGA @ 60 FPS
848 x 480
16:9
2. Bit rate
Options in recording modes: 1080P (12M/6M), 960P (8M/4M), 720P (8M/4M), WVGA (8M/4M). If a high bit rate is
selected, you will get a clearer picture with increased file size.
3. Capture mode
Select either video recording or voice recording
Note:
In voice recording mode, press the “Record” key once. The system will start recording, the voice recording
duration will be displayed on the bottom of the TFT display screen and the green indicator will flash slowly.
When the “Stop” key is pressed, the system will stop and save the current audio file recorded, the green indicator
will turn off and the red indicator will remain on (the corresponding operating prompt will be shown on the LCD
segment screen) and the camera will return to preview mode
Note:
The voice recording process only responds to operations of “Stop” and “Shutdown”
