32
33
Power supply
For charging the Edge HD10, please use chargers certified by the following authorities only:
Care for your Edge HD10
• Do not drop, knock or shake the video camera
• Do not put the video camera close to an object that generates a strong magnetic field, such as a television set,
a speaker, a motor or a magnet. Do not put the video camera close to an object that emits powerful radio waves,
for example, an antenna. Do not put the memory card in a place where static electricity is easily generated.
Strong magnetic fields may cause faults on the video camera or damage the files
• Do not expose the video camera to high temperatures or direct sunshine
• When recharging the battery, disconnect the power supply immediately if overheating or if smoke or a peculiar
smell occur
• Keep the video camera out of the reach of children during charging. The power cable may cause asphyxia or
electrical shock
• Store the video camera in a cool, dry and dust-free place
Notices for Waterproof Casing
The waterproof casing should be installed correctly.
Please note the following when using the camera:
1. Do not disassemble and reaffix the sealing ring of the casing, keys and lens cover. Doing so can make the
waterproof casing ineffective
2. Do not place the casing in environments where there is corrosive gas such as strong acid or alkali and keep
it away from chemicals and other corrosives
3. To avoid deformation, do not expose the waterproof casing to high (above 50°C) or low (–10°C) temperatures
for long periods of time
4. To avoid deteriorating the waterproofing performance, do not expose the casing to direct sunlight for long
periods of time
5. Before using the casing, we advise you to check that the seal rings are in good condition, the casing is well
sealed and tightly buckled and that there is no debris in the sealing joints
6. After using the casing in sea water, please clean with fresh water, then use a dry cloth to wipe the surface.
Leave in a cool and ventilated place to dry
