11
GB
10
GB
Inside
diameter
Nipple
Size L
Size S
Breast shield
or
3
Cleaning
and disinfecting accessories
• Before using for the first time and after each use:
a. Cleaning
- Rinse all the parts in contact with the milk in cold water, then clean
with hot and soapy water.
- Rinse all parts. Assemble the two parts of the valve: the diaphragm
on the intermediate ring (making sure that the valve is nested in
the ring). Assemble the three parts making up the protective
membrane. Check that the white diaphragm is correctly positioned
in its housing (press down on the edges to ensure a good seal
around the membrane)
- Allow to air dry on a paper towel.
Note: It is best to clean all parts in contact with breast milk
immediately after using the breast pump. This facilitates cleaning
and avoids the development of bacteria.
• Before first use and regularly during use:
b. Disinfecting at home
Disinfect all parts in boiling water (10 minutes minimum), in a
dishwasher or in a microwave steriliser. *
*Refer to the manufacturer’s data for the microwave sterilizer and do not exceed 1000 Watt.
Note: If disinfection takes place in boiling water and your water is hard, you
can add a few drops of white vinegar (2 or 3 drops) to avoid deposits on the
walls of the parts.
•
Special case:
If condensation appears in the pipe or when milk enters inside, rinse
the tubing to remove liquid residue.
3
4
5
6
1
2
KOLOR
®
breast shields are guaranteed BPA and Phthalate free.
They are reusable for as long as the breast pump is used. The breast shield is a one-piece
which favors an optimized hygiene, and makes it possible not to touch the thread nor the
internal parts of the feeding collection container and the breast shield.
Measurements:
Measurement should be taken after breastfeeding or expressing your milk. Alternatively,
“when at rest”, add an extra 2mm to your nipple measurement to select the correct
inner diameter size.
The nipple should not feel too constricted neither too free. You should see space around
your nipple in order to let it move easily in the funnel during pumping.
- If the breast shield is too tight: lesions, compressed ducts
- if the breast shield is too wide: less milk will be expressed
A correct comfort size (external S or L comfort shape) will improve breast pump
(optimal airtightness).
