-8-
Replacement of Carbon Filter
Before replacing carbon filter, disconnect energy of the device. As carbon filter is used
in the kitchens, which do not have chimney outlet, it should be replaced once in each 3-
5 months subject to using. Carbon filter should not be washed in any time. In order to
fasten carbon filter into its place, place its top nails to its sockets and provide putting
nails into their places forwards flatly. In order to remove carbon filter from its place,
press top nails and remove them from their places and then pull filter towards yourself.
Figure 4
Figure
4
Effective Ventilation
In order to ensure the ventilation occurs correctly, kitchen windows,
which are opened outside, should be kept closed.
IMPORTANT NOTE
Attention should be paid when the device is operated at the same time
with a device which operates using air and fuel (for instance, heater,
water heater etc., which operates using gas, diesel fuel, coal or wood).
Because cooker hood may affect burning negatively as it exhausts the
air in the ambient.
This warning is not valid for usages without chimney.
5 Speed LCD Control Usage
On/Off Button:
This button starts and stops the motor. Starting speed of the motor
is 2nd speed.
–
Button: Decreases speed. Speed can be reduced till 1st speed. When button is
pressed longer, 1 speed is decreased each half seconds.
+ Button: Increases speed. Speed can be increased till 5th Speed. When button is
pressed longer, 1 speed is increased each half seconds. When the cooker hood is
set to 5th speed, motor will operate at 5th speed for 15 minutes then continues
operating at 2nd speed. 5th speed is turbo speed.
Timer - Button: :
It is used for setting the time that timer will start operating
decreasing the time. Timer decreases 1 level at each press, if the button is pushed
longer level will decrease fast.
Timer + Button:
It is used for setting the time that timer will start operating
increasing the time. Timer increases 1 level at each press, if the button is pushed
longer level will increase fast. Cooker-hood has timer function for two different usage:
-9-
Functions of the Product
Cooker hood is used at kitchens that has chimney or without chimney.
Usage with chimney
Cooker hood should be connected to a chimney that will direct the air out during usage
with chimney. In order to get good performance from your cooker hood, pay attention that
the duct system follows the shortest way for connection to the chimney. Your product is
produced as it will be appropriate for usage with chimney.
Attention!!!
Outlet of the cooker hood should not be connected to air canals
Washable
Aluminum Cassette Filter
MAINTENANCE
*Plug should be taken off or switch should be turned
off before maintenance and cleaning process.
*Aluminum cassette filter holds the dust and the oil
in the air.
*Metal filter should be washed once in a month with
hot and soaped water or at dishwasher (60C) if
possible.
*Take off aluminum cassette filter pressing on
springy latches on end point. After you cleaned it, do
not montage before it dries.
*Outer surface of the cooker hood should be wiped
with a wet cloth that is wetted with water or alcohol.
*You should be careful not to cause contact of
electronic parts with water or similar materials.
*Using Inox cleansing and maintenance products
available in the market will help your product stand
longer.
Warning:
Aluminum filters may be washed in the
dishwasher. Color of aluminum filters may change
after a few washing. This is normal and it is not
necessary to change the filters.
