-6-
Drilling Hook Bores Picture 6a
Stick assembly template onto the
surface, where chimney hood will be
hung and drill bore with Ø8 mm drill
from the points, marked with (A, B, C).
Drill bore with Ø 6mm drill in order to
screw chimney assembly sheet by
referring min. and max. height sizes of
the product. F
igur 2
Figur 2
HAMMERING EXPANSION BOLTS
Hammer Ø8 mm expansion bolts for hook sheet (A, B, C) into
drilled bores. Hammer 2 pieces of 6 mm expansion bolts for
chimney assembly sheet into drilled bores with Ø6 mm.
Picture 5
Screw chimney assembly sheet to Ø 6 expansion bolts,
which you hammered on the wall, with 3,9x22 screws,
which are provided together with your aspirator.
Picture 6
Picture 5
Picture 6
Screwing hook screws:
Screw hook screws 5,5x45 to Ø 8 mm expansion bolts,
which you hammered on the wall
(A, B). 5 mm distance
should remain between screw head and wall.
Picture 7
Picture 7
A
B
Hanging Chimney Hood onto the Wall:
Hold from body of chimney hood and then hang from (L)
sheets, which you fasten to aspirator cabinet in advance, to
the wall from A and B point.
Picture 8
Picture 8
TECHNICAL SPECIFICATIONS
Model
Feeding voltage
Engine power (W)
Lamp power (W)
3
Flow rate (m /h)
220-2
4
0 V 50Hz
210 W
1
2
3
220
320
420
Motor isolation class
Isolation class
F
CLASS I
4
5
550
800
2
x
5
0 W
T
able
1
-11-
IN ORDER TO USE THE COOKER HOOD EFFICIENTLY
:
*Use ducts of 150/120mm diameter and as few bends as possible when you make
the chimney connection.
*Pay attention to aluminum filters' cleaning periods and changing periods of carbon
filters.
*Use the product at middle speed if high suction power is not necessary.
* In order to ensure that ventilation occurs correctly, windows of the kitchen should
be kept closed.
Position
