After hanging process is completed, squeeze hanger
screws, which are assembled onto the wall in
Picture 7,
by means of screwdriver, in order not to allow movement
of the product.
Picture 9
Picture 9
After you fix your chimney hood completely, fix the body
onto the wall with one piece of screw from the bore (C)
within the body, in order not to allow its movement.
Picture 10
Pass chimneys
around the body.
Picture 12
Picture 10
Picture 12
Picture 11
FIXING ALUMINUM
PIPE
Fix flexible aluminum
pipe onto plastic
chimney. Fix other end of
pipe onto chimney bore
on the wall.
(Picture 11)
Screw internal chimney to the chimney assembly sheet, which is
fixed
on the wall from its top external edges.
Picture 13
Picture 13
NOTE:
If there is any inclination in the appearance of
aspirator, adjust parallelism of aspirator by loosing M 5
screws, on which hook sheets are fastened on the top,
slightly
Figure
3
-7-
PROGRAMMABLE OPTIONS
Programmable options can be set when motor and lamp is closed and not set.
1-Back light brightness settings:
When – button is pushed for
approximately 5
seconds
blue color percentage appears on the screen (for example: b 00). When V-
button is pushed once more red color percentage will appear on the screen. (for
example: r100) When V- button is pushed once more green color percentage will
appear on the screen. (for example: g10). Pressing Tmr+ and Tmr- buttons
(pressing for longer time it can be set fast) the color whose percentage appears on
the screen can be set between 0 and 100. New color is set pressing – button for 5
seconds (beep sound is heard) and settings mode will be left. In order to leave
settings mode without setting an option, on/off or lamp buttons can be pushed.
2-Back light option:
Back light is always at on position. K button pressed
for 5 seconds (beep sound will be heard) when motor and lamp is off and not set
(that is when the chimney hood is not operating) back light can be set so that it will
be off. In order to set back light to be on cons button should be pressed for
approximately 5 seconds.
-10-
Picture 1
1
Changing the Lamps
Cut off the connection of the cooker hood with electricity. Take off the
aluminum cassette filter. Take off the failed lamp and replace it with a
new one that is of the same rating. (please wait for the lamps to get
cooler as they might hurt your hand.)
Changing 50W Halogen Lamp
In order to change halogen lamps, take the lamp downwards pushing
back of lamp holder downwards and then turning it a little bit anti-
clockwise take it off downwards.
1-
Timer for stopping the cooker-hood: If the timer is set when the motor is operating,
cooker-hood will stop, lamp will be off and buzzer will ring for 5 seconds when timer
period is over.
2-
Timer for alarm: If the timer is set when the motor is not operating, alarm timer will
have been started. When the timer is over, just buzzer will ring for 15 seconds; even
though motor is operated or the lamps are set to on position when the timer is
operating, motor will not stop operating and lamp will not be off. When timer is not set,
timer clock shows the real time.
Clock:
Real time is always displayed. Two points between the hour and the minute
flashes each 1 second. In order to set hour, Tmr+ ( ) and Tmr- buttons are pushed at
the same time. Hour and minute flashes for 5 seconds. When flashing continues,
pressing Tmr+ ( ) or Tmr- ( ) button minute can be increased or decreased. During
flashing, hour can be set using Tmr- or Tmr+ buttons, time can be set. (When electric
failure occurs, settings will be reset.)
Filter Warning :
Filter cleaning icon appears on the screen after the cooker hood is
operated for 60 hours and it flashes each second. Pressing on/off button for 3 seconds,
filter time can be reset and filter icon can be deleted.
Blue ( % )
Red ( % )
Green ( % )
Color
100
100
100
Light Turquoise
0
100
100
Light Green
0
0
100
Green
100
0
0
Blue
50
100
0
Purple
0
100
0
Red
0
0
0
Colourless screen
0
100
10
Orange
