20
USINg YOUR ACCESSORIES
4
To remove slicing disc, remove work
bowl lid and using the 2 finger grip
holes, lift the disc straight up.
Finger grip hole
Finger grip hole
Installing/removing the slicing disc
1
Place the disc on the power shaft.
2
Slightly rotate the disc until it drops
into place.
3
Install the work bowl lid, aligning
the tabs and locking it into place.
NOTE: Changing thickness settings with
other discs or blades installed will have no
effect on operation.
Be aware, it is possible to change the thickness
of your slices by changing pressure on the food
item when guiding it into the feed tube. Use
more pressure for a thicker slice, or use less
pressure for a thinner slice.
Adjusting the slicing thickness
Move lever to desired thickness setting.
Thicker
Thinner
IMPORTANT: Discs and adapters must be removed before removing bowls.
USINg YOUR ACCESSORIES
W10545030B_ENv3.indd 20
1/25/13 10:53 AM