11
Home Canning
Canning can be performed on the induction cooktop. See the
“Cookware” section to check if the canner will work on the
induction cooktop. When canning for long periods, alternate the
use of surface cooking areas or elements between batches. This
allows time for the most recently used areas to cool.
■
Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than
1
/
2
" (1.3 cm) beyond the surface cooking area
or element.
■
Do not place canner on 2 surface cooking areas or elements at
the same time.
■
On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
■
For more information, contact your local agricultural extension
office or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
IMPORTANT:
The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
When the oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
■
Valid keypad press
■
Oven is preheated (long tone).
■
Kitchen timer (long tone with reminder tone every minute)
■
Function has been entered.
Three Tones
■
Invalid keypad press
Four Tones
■
End of cycle (with reminder tone every minute).
Use the Options keypad to change the tone settings.
Options
Many features of the oven control can be adjusted to meet
your personal needs. These changes are made using the
Options keypad.
Use the Options keypad to scroll through the features that can
be changed. Each press of the Options keypad will advance
the display to the next setting. After selecting the feature
to be changed, the control will prompt you for the required
input. Details of all of the feature changes are explained in the
following sections.
Press OFF UPPER or OFF LOWER to exit Options.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but it can be changed
to Celsius.
1.
Press OPTIONS until “TEMP UNIT” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and keypress
tones.
1.
Press OPTIONS until “SOUND” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1.
Press OPTIONS until “SOUND VOLUME” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press OFF UPPER or OFF LOWER to exit and display the time
of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1.
Press OPTIONS until “END TONE” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1.
Press OPTIONS until “KEYPRESS TONE” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end-of-cycle tones.
1.
Press OPTIONS until “REMINDER TONE” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press OFF UPPER or OFF LOWER to exit and display the time
of day.
