![background image](http://html.mh-extra.com/html/kitchenaid/kesc300h-bl/kesc300h-bl_technical-education_1973009033.webp)
4-7
REMOVING THE COOKTOP GLASS
1.
Unplug range or disconnect power.
2.
Pull the range out of its mounting location
so that you can access the side trim.
3.
Remove the control panel from its
subchassis, (see page 4-2 for the proce-
dure), and set it on the subchassis.
4.
Remove the two screws from the left and
right side trim. Do not remove the trim at
this time.
6.
Loosen the left and right tension bracket
screws and remove the brackets from
behind the side trim.
7.
Remove the wire clip from the left side
trim.
Continued on the next page.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Right Side
Trim Screws
5.
Raise the cooktop and prop it up (see
steps 3 and 4 on page 4-5 for the proce-
dure).
Right Tension
Bracket
Left Tension
Bracket & Clip
Summary of Contents for KESC300H BL
